]Model Name | Description |
SFC-CENTER/16M | SFC-CENTER/16M 16slots managed chassis W/AC Power |
SFC200M-SCM | 10 / 100 TX-FX(SC) Multi-Mode for SFC-CENTER/16M |
SFC200M-STM | 10 / 100 TX-FX(ST) Multi-Mode for SFC-CENTER/16M |
SFC200M-SCS(30Km) | 10 / 100 TX-FX(SC 30km) Single-Mode 30km |
SFC200M-SCS(60Km) | 10 / 100 TX-FX(SC 60km) Single-Mode 60km |
SFC2000M-TS | 100/1000 TX-SX multi-mode for SFC-CENTER/16M |
SFC2000M-TL | 100/1000 TX-LX single-mode for SFC-CENTER/16M |
<16 Slot Management Converter Chassis>
|
| MC-16i is designed to accommodate 16 slide-in modules of various type of media converter modular, it can be install to any cabinet that compatible EIA RS310C Standard.The 16 slots Modular chassis can to accommodate many type of 100Mbps Fiber media converter , such single-mode fiber or multi-mode fiber to twisted pair cable .Each media converter module can transparently link any backbone device , such as Switch, Router, NIC and operate on independently segment.. For the management function, users can management the chassis and get each media converter module s operate information and remote side converter information, such as Link lose forwarding (LLF), management module will send Traps to NNMs and record a Log file when the event happened.
|
| |
| Feature |
| - 16 slots converter chassis with 2 power slots
- AC or DC power with redundant function
- SNMP MIB II and private MIB supports
- Max. 16 slots for media converter
- HTTP, Telnet security
- 10/100TX to 100FX module
- IP address security for management station
- 10/100/1000TX to Gigabit fiber module
- Web firmware upgrade
- 10/100/1000TX to GBIC or Mini GBIC module
- Link Loose Forwarding (LLF)
- 100FX WDM module support
- Fiber Module hot-swappable
- Module identification
- CPU module hot-swappable
- 100FX and Gigabit module support single mode or multi mode fiber
- SNMP, Web, Telnet, console management
- EIA RS-310C 19 " standard
|
| |
| Hardware Specification |
| | Standard
| IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX and 100BASE-FX with N-way auto negotiation IEEE802.3ab Gigabit copper with N-way auto-negotiation IEEE802.3z for Gigabit fiber
| Switch architecture | Store and Forward, Internal Packet Gap 960ns, Filter illegal and error packet.
| Fiber parameters | Fiber Core: Multi-Mode (62.5/125um, 50/125um) Single-Mode (8/125um, 10/125um) Wavelength: 100Mbps multi-mode : 1310nm / 100Mbps single-mode: 1310nm 100Mbps WDM 1330 : TX 1310nm , RX 1550 nm 100Mbps WDM 1550 : TX 1550nm , RX 1310 | Transparent packet | 64 to 1518 Bytes for Non-VLAN Ethernet packet 68 to 1522 Bytes for VLAN-Tag type Ethernet packet
| LED | CPU Module: CPU Ready, Power Good(A, B) Power Fail(A,B),TX (link/Act, FDX) 100FX Module: Power, TX (Link /Act, speed, FDX), FX(Link /Act, FDX) Gigabit Module: Power, Gigabit Copper (Speed, 1000Mbps, LK/ACT, FDX/COL), Fiber (Link/Act, FDX/COL)
| Power | Redundant and Load Sharing function support (AC or DC) AC 90~240 VAC, 50/60 HZ @ 20A (max) DC - 40.5 ~ - 57.0VDC @ 20A (max)
| Dimension | 448mm(w) * 89mm(H) * 279mm(D) | EMI & safety | FCC Class A, CE, UL
|
|
| | |
| Software Specification |
| | Management
| Telnet, Web, console | Web/Telnet | Web and Telnet function can be enabled or disabled. | MIBS | RFC 1213 MIB II, Private MIB | SNMP Trap | Link down, Link up, Power module status change, authorization Fail, Module plug in and plug out, chassis configuration change, module configuration change. | Software Upgrade | firmware upgrade by Web interface. | Link Loose Forward | Each module support LLF feature. It can be set by Web or CLI menu. LLF Mode TX => Fiber :TX port link down , the fiber port will be forced down LLF Mode Fiber => TX :Fiber port link down , the TX port will be forced down | Packet counter | TX port: IN-good / In-bad packet counter, out-good /out-bad packet counter, collision counter Fiber port: IN-good / In-bad packet counter, out-good /out-bad packet counter | SNMP Trap Node | Up to 4 Trap node. | IP security | It supports IP security for telnet, HTTP and SNMP access. Up to 4 IP nodes when security is enabled. | Events log | Up to 4095 event records. It can be re-view by CLI and Web browser mode. | Module notice | Per module can add notice for allocate information and characters up to 32. |
|